Speco HS Rev 1.0 Copyright I-View Now, LLC 2014 9
Firmware Version
The version of the firmware on the DVR tested with I-View Now is shown below. The DVR should have this version set to
ensure proper interoperation with I-View Now.
On the Speco menu select the and DESCRIPTION which should show a screen similar that below. Note, the
SOFTWARE VERSION of the firmware must match this configuration as this is the specific Speco firmware that has been
integration tested with I-View. Other versions will not work. If you need to download and update the firmware please
refer to the Speco manual and their site to obtain this specific firmware software package and install it into the machine.
Depending on how new the firmware release is you may need to contact the manufacturer directly.
To Next Page
Loading...
