Speco NRL - Exception

Alarm Management
NVR User Manual
44
⑥ Click “Processing Mode” to go to the alarm handling configuration interface of object detection.
Object Detection Alarm Handling Configuration:
① Click StartSettingsAlarmIntelligence AlarmObject Detection to go to the following interface.
② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The alarm handling setting of object
detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm
for details).
③ Click “Apply” to save the settings. You can click “Object Config” to go to the object detection configuration interface.
9.3.2 Exception
Exception Configuration:
① Click StartSettingsCamera Intelligent Analytics Exception to go to the following interface.