Speco NRL - Account & Permission Management; Account Management; Add User; Edit User

Account & Permission Management
NVR User Manual
51
10 Account & Permission Management
10.1 Account Management
Click StartSettingsAccount and AuthorityAccountEdit User to go to the interface as shown below.
Area ① displays the user permissions. Area ② displays the user list. Click the user in the list to display its user permissions in area ①.
There are three default permission groups (“Administrator”, “Advanced” and “Common”) available when adding accounts. You can manually add new
permission group (see 10.3.1 Add Permission Group
for details).
Only admin and the users that have the “Account and Authority” permission can manage the system’s accounts. Group “Administrator” owns all the
permissions displayed in area ① except “Account and Authority” and its permissions cannot be changed while the permissions of “Advanced” and
“Common” can be changed.
10.1.1 Add User
① Click StartSettingsAccount and AuthorityAccountAdd User or click beside the search box to pop up the window as shown below.
② Set the username, password and group. User can also set the pattern lock here. The e-mail address is optional. Click “Add” to add the user.
10.1.2 Edit User
Click StartSettingsAccount and AuthorityAccountEdit User and then click in the user list or double click the user to edit the user
information. Click to delete the user (the user admin cannot be deleted).