USER MANUAL
13
Port
Web Port:
This is the port that you will use to log in remotely to the WIRELESS NVR (e.g. using
the Web Client). If the default port 80 is already taken by other applications, please change it.
Client Port:
This is the port that the WIRELESS NVR will use to send information (e.g. using the
mobile app). If the default port 9000 is already taken by other applications, please change it.
RTSP Port:
This is the port that the WIRELESS NVR will be allowed to transmit real-time
streaming to another device (e.g. using a streaming Media player.).
UPNP:
If you want to log in remotely to the WIRELESS NVR using Web Client, you need to
complete the port forwarding in your router. Enable this option if your router supports UPnP. In this
case, you do not need to manually configure port forwarding on your router. If your router does not
support UPnP, make sure the port forwarding is completed manually on your router.
4.1.3 Date/Time
This menu allows you to configure the Date, Time, Date Format, Time Format, Time Zone, NTP
and DST.
Date and Time
Click on the calendar icon to set the current system date.
Date:
Click on the calendar icon to set the system date.
Time:
Click to set the system time.
Date Format:
Choose from the dropdown menu to set preferred date format.
To Next Page
Loading...
Need help?
General