Spectra Precision DG613 Information Guide

2
. Set an adjustment pipe target so that the target’s bull eye is at
the same distance above the invert as your laser.
3. Place the pipe target in the last section of the pipe that has
been checked to be at the correct grade, elevation and line.
4. Adjust the pipe target until it’s level vial reads level.
5. Align the laser to the target’s bulls eye using the line buttons on
the Laser or the Wireless Remote.
6. Lay Pipe – Set the target in each new section of the pipe and
adjust the pipe until the laser intersects the target’s bulls eye
while the target is level.

Spectra Precision DG613 Specifications

General

Brand	Spectra Precision
Model	DG613
Category	Measuring Instruments
Language	English