Need help?Do you have a question about the Spectra Precision DG813 and is the answer not in the manual?
General| Brand | Spectra Precision |
|---|---|
| Model | DG813 |
| Category | Measuring Instruments |
| Language | English |
Steps to establish a radio or IR connection between the DG laser and RC803 remote.
Procedure for pairing the DG813/DG613 laser with the SF803 Spot Finder.
Guide to positioning the laser, initialization, and starting the temperature/reference check.
Instructions for entering and adjusting grade values using Digit Select mode.
Instructions for entering and adjusting grade values using the Step + Go mode.
How to use the Automatic Spot Align feature to guide the beam to a target point.
Initial setup for Spot Align at the jobsite using a direction pole.
Using Automatic Spot Match to measure grade in existing pipes or check pipe alignment.
How to use Automatic SpotLok to align and hold the beam to the SF803's center point.
Using Manual Spot Search to detect the beam manually for pipe laying.
Using Line Scan for faster setup and automatic movement of the laser beam.
Setting line vertically using the laser beam without an SF803.
Table detailing common error codes for DG813/DG613 and their corresponding solutions.
To Next Page
