Spectra Precision DG813 - Pairing DG813;DG613 with RC803; Pairing DG Lasers with RC803 Remote

Pairing DG813/DG613 with RC803
First, make sure the transmitter and the remote control are turned off. Then press and hold
the button and turn on the transmitter. During the next 6 seconds (the red LED
flashes fast while the display shows Pairing repeat the same steps on the
remote control.
The remote’s display show Pairing OK for one second and then the same
function as the laser is actually working to indicate the transmitter has been matched with
the remote control.
1


+
I
O
2


+
I
O