Spectra Precision EPOCH 50 - Rover setup

2 Setup, Connection, and Cabling
18 EPOCH 50 GNSS System User Guide
2.1 Rover setup
C
WARNING – The receiver uses a rechargeable Lithium-ion battery. To avoid personal
injury or equipment damage, make sure that you read and understand the Safety
Information on page 5 at the front of this manual.
To mount the receiver on a range pole:
1. Thread the receiver onto the range pole.
2. Attach the supplied UHF radio antenna to the ANTENNA port on the receiver.
3. Attach the controller bracket to the pole.
4. Insert the controller into the bracket.
5. Optional. Connect the instrument cable to COM1 if Bluetooth will not be used.
Figure 2.3 EPOCH 50 GNSS receiver set up as a rover receiver
EPOCH 50 GNSS receiver and antenna
Spectra Precision controller
Optional cable