Spectra Precision EPOCH 50 User Manual

EPOCH 50 GNSS System User Guide 29
General Operation 3
3.1 Resetting to defaults
To reset the receiver to the factory default settings:
1. Press the power button to turn off the receiver.
2. Press and hold the power button.
EPOCH appears on the receiver screen and
then
Factory defaults scrolls across the screen. The receiver counts down from
5—with a beep sounding for each digit.
3. As soon as
WAIT appears on screen, release the power button.
4.
Off appears on the receiver and it then turns off.
5. Press the power button again to turn on the receiver. The factory defaults are
now set.
See also Default settings, page 36.

Spectra Precision EPOCH 50 Specifications

General

Brand	Spectra Precision
Model	EPOCH 50
Category	Receiver
Language	English