©2023 Spectra Precision | All Rights Reserv ed
RC1402 Remote Control
Powering the RC1402
1. Open the battery door using a coin or similar pry device
to release the battery door tab on the RC1402N.
2. Insert two AA batteries noting the plus (+) and minus (-)
diagrams inside the battery housing.
3. Close the battery door. Push down until it „clicks“ into
the locked position.
Turning On the RC1402
Press the Power button to turn on the radio remote control.
The RC1402 mirrors the functionality of the GL1425C
keypad.
Turning Off the RC1402
Press and hold the Power button for two seconds.
The RC1402 is backwards compatible with the products GL412N, GL422N, HV302(G) and LL300S
To Next Page
Loading...
Need help?
General
