Spectra GL1425C User Manual

©2023 Spectra Precision | All Rights Reserv ed
RC1402 pairing with the laser
Option 1:
1. Make sure both the laser and the remote control are turned off.
2. Start with the laser: Press and hold the manual button and turn on the laser
pressing the power button. Result: the laser battery LED flashes fast.
3. Continue with the remote control: Within six seconds press and hold the
manual button and turn on the remote control pressing the power button.
4. The laser and the RC1402 display show „Pairing OK“ for one second. Finally
the RC1402 shows the laser information to indicate the laser has been
machted with the remote control.
Option 2:
Bring the laser into pairing mode using the Menu
1. Press the M button.
2. Scroll to Settings, press the E button.
3. Scroll to Pairing, press the E button.
4. Scroll to Radio, press the E button. Result: the laser is in pairing mode.
5. Do step 3 from option 1.
6. The laser and the RC1402 display show „Pairing OK“ for one second. Finally
the RC1402 shows the laser information to indicate the laser has been
machted with the remote control.

Spectra GL1425C Specifications

General

Brand	Spectra
Model	GL1425C
Category	Measuring Instruments
Language	English