Bottle Assembly
The following instructions describe how to prepare the Spectra bottles for
feeding:
1. First wash your hands in warm soapy water before touching parts
that come in contact with milk.
2. Then, insert the teat by firmly pressing it from the underside and up
into the bottle neck (where the sealing disc would go).
3. Screw the neck firmly onto the collection bottle.
4. When not in use, place the bottle cap over the teat to keep it clean.
Tip: To avoid leaking, always transport and store the bottle in the upright
position, and when possible store with the sealing disc in place instead of
the teat.
To Next Page
Loading...
