Spectra T50e Quick Reference

Service Procedure Quick Reference
Power Supply Replacement
T50e
August 2017 V2
Page 1 of 2
Not a substitute for official published procedural guide
Detailed instructions/videos located at support.spectralogic.com
Tools & Supplies
 New power supply kit(s) from Spectra Logic
 #2 Phillips screwdriver
 USB flash drive (FAT32)
o For collecting Auto-support Log File (ASL)
Estimated Time
20 minutes
ESD Protection
Required
Library Power
Off
 If the only installed power supply in the library is being replaced
OR
 If there are two installed power supplies and both are being replaced
On
 If there are two installed power supplies and only one is being replaced
Data I/O Operations
Discontinue
 If the only installed power supply in the library is being replaced
OR
 If there are two installed power supplies and both are being replaced
Verify with customer that data I/O to library has halted
Continue
 If there are two installed power supplies and one is functioning normally
Robotic Movement
Discontinue
 If the only installed power supply in the library is being replaced
OR
 If there are two installed power supplies and both are being replaced
Verify robotic movement has been halted
Verify with customer that move requests from host have been halted
Continue
 If there are two installed power supplies and one is functioning normally
Admin./Superuser
BlueScale Login
No

Spectra T50e Specifications

General

Brand	Spectra
Model	T50e
Category	Storage
Language	English