HAX and VAX Lubrication Instructions Reinstall the Window Panels
April 2012 HAX and VAX Lubrication Instructions—Spectra T950 Library
11
REINSTALL THE WINDOW PANELS
Use the following steps to install the window panels on the ends of the right-
most and left-most frame
s.
1. Lift the panel and position the openings on the back of the panel on the
hooks on the sides of the opening in the end of the frame.
2. While holding the panel steady with one hand, slide the panel down
into place.
3. Use a 1/8-inch Allen wrench or hex screwdriver to install the screw at
the bottom of the side panel.
RESTART BACKUPS
Use your backup software to restart any backup processes running on the
library.
Figure 14 Lift the panel onto the hooks
on the sides of the opening.
Figure 15 Slide the panel
down into place.
Figure 16 Install the screw
to secure the panel.
To Previous Page
Loading...
