14212650-IG, Edition 1.0
April 2018, Original document
16
Installing Multiple Spectralink IP-DECT Server 200 in a
Small Area
Small area is defined as: a radius of less than 30 meters/100 feet.
The image below shows a single-cell configuration supporting up to 5 Spectralink IP-DECT Server
200s within a 30 meters/100-feet radius. Users can talk within their own 30 meters/100-feet cell.
1. Follow the previous instructions and select the optimal locations for up to 5 Spectralink IP-
DECT Server 200s serving up to 30 handset users and the areas where they are situated.
Ideally, mount the individual Spectralink IP-DECT Server 200s about 0,6 meters/2 feet apart
from each other, but place all near the center of the cell as in the diagram above.
2. In coverage areas with multiple floors or heavy walls, the Spectralink IP-DECT Server 200s’
range may be limited to ~15 meters/~50 feet or less for the floors above or across the heavy
walls.
Test the Spectralink IP-DECT Server 200s’ range and call quality before permanently
installing them.
l The same limit of up to 5 Spectralink IP-DECT Server 200s per 30 meters/100-feet radius
cell applies across floors and heavy walls.
l You will achieve the best results by mounting all the Spectralink IP-DECT Server 200s
either high on the wall near where most users reside most of the time, or on the side of any
heavy wall where most users reside most of the time.
Spectralink IP-DECTServer 200 Deployment and Installation Guide
To Next Page
Loading...
