Hardware Installation and Maintenance Manual 1–1
1 - INTRODUCTION
SpectraSensors’ SS2100 products are high-speed, diode-laser based extractive
analyzers designed for extremely reliable monitoring of very low (trace) to
standard concentrations of specific components in various background gases.
In order to ensure that the analyzer performs as specified, it is important to
closely review the installation and operation sections of this manual. This
manual contains a comprehensive overview of the SS2100 hardware
installation and maintenance through step-by-step instructions on:
• Inspecting the analyzer and sample conditioning system (SCS)
• Mounting and connecting the analyzer and SCS
• Maintaining and troubleshooting the system
For instruction on operating the analyzer through firmware programming,
please consult the Firmware Operator’s Manual.
Who Should Read This Manual
This manual should be read and referenced by anyone installing, operating or
having direct contact with the analyzer.
How to Use This Manual
Take a moment to familiarize yourself with this manual by reading the Table
of Contents.
There are a number of options and accessories available for the SS2100. This
manual has been written to address the most common options and accessories.
Images, tables and charts have been included to provide a visual
understanding of the analyzers and its functions. Special symbols are also used
to provide the user with key information regarding the system configuration
and/or operation. Pay close attention to this information.
General Warnings and Cautions
Instructional icons are provided in this manual and on the SS2100 unit to alert
the user of potential hazards, important information and valuable tips.
Following are the symbols and associated warning and caution types to observe
when servicing the analyzer. Some of these symbols are provided for
instructional purposes only and are not labeled on the system.
To Next Page
Loading...
