1. Now the t elescope is ey e-viewing ready. This telescope is exceptional for viewing celestial object or t errestrial object.
2. To locate an object, first loosen t he two axis l ock knobs shown in Fig. .
3. Move the telescope until the OTA is roughly pointing at the object you wish
to observe.
4. Use the handle control bar to move the telescope around as you look
through the viewfinder until the crosshair overlaps the object you wish the
observe. Look through the eyepiece and the object should be within the view
of field. Then lock down the two axes. (See Fig.17)
5. Focus the telescope and enjoy the magnificent world around you!
1. Now the telescope is eye-viewing
ready. This telescope is exceptional
for viewing celestial object or
terrestrial object.
2. To locate an object, first loosen the
two axis lock knobs shown in Fig.16.
rotate the handle bar CCW to unlock
the Altitude axis. Rotate the Azimuth
lock knob CW to unlock the axis.
SETTING UP
FIG.16
FIG.17
Visual Viewing
10
ASTROLITE TELESCOPE
To Next Page
Loading...
General