Wash The Wash status light is lit
during the wash portion of the
cycle including Pre-Wash and
Soak, if selected.
Rinse The Rinse status light is lit
during the rinse portions of
the cycle including Second
Rinse and Third Rinse, if selec-
ted.
Spin The Spin status light is lit
during the final spin portion of
the cycle.
To Wash Clothes
IMPORTANT: Before using your new washer, make sure
the washer cord is connected to an appropriate electrical
outlet that is properly installed and connected to a pro-
tective earth/ground. Make sure the washer hoses are
connected to the hot and cold water faucets, and that the
faucets are turned on. Be sure the drain hose is not
kinked and is inserted into a drain. Refer to the INSTAL-
LATION INSTRUCTIONS for details of proper washer in-
stallation.
IMPORTANT: Prior to first wash, use an all purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside of wash drum.
1. Get the clothes ready for washing. Empty pockets and cuffs.
Sort items into separate loads. Pretreat stains and heavily
soiled areas.
IMPORTANT: Remove all sharp objects from laundry
to avoid tears and rips to items during normal ma-
chine operation.
2. Measure and add low sudsing, High Efficiency (HE) detergent to
the washtub. Follow instructions on detergent package for
amount to use.
NOTE: High ef ficiency (HE) detergent is recommen-
ded for use in this machine. Look for the HE logo or
“high ef ficiency” on the detergent’s label.
3. Add clothes loosely into the washtub (16 lbs. [7.2 kg] maxi-
mum dry clothes load).
4. Close the lid. The washer will not fill, agitate or spin with the lid
open.
WARNING
To reduce the risk of serious injury, do not by-pass
the lid switch to permit the washer to agitate or
spin with the lid open.
W898
5. If not already on (control lights will be lit), turn on the washer.
Press the Power buon to turn on the washer.
Control Panel
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
13 Part No. 202956R4
To Next Page
Loading...
