SpeedTech Lights Z-3 - Page 8

8 SpeedTech Lights, Inc © 2019
Z
-
3
GRILLE / SURFACE MOUNT
All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means,
including but not limited to photocopying, recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without
the express prior written consent of SpeedTech Lights, Inc, except for non-commercial purposes as permitted by United States copyright law. Customers
of SpeedTech Lights, Inc, may download and print this Instruction Manual for use with products sold to the customer by SpeedTech Lights, Inc. However,
no part of this Instruction Manual may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred, in any form or by
any means, except with the prior written consent of SpeedTech Lights, Inc.
Flash Pattern List
• Steady Burn
• Single Flash 90 FPM
• Single Flash 210 FPM
• Triple Flash 60 FPM
• Single Flash 240 FPM
• Single Flash 120 FPM with Burst
• Triple Flash 90 FPM
• Quad Flash 90 FPM
• Single Flash 60 FPM
• Single Flash 150 FPM
• Single Flash 60 FPM with Burst
• Accelerating Single Flash
• Single Flash 45 FPM
Flash Pattern Shortcuts
• Hold Yellow cable to +12 VDC for 2 seconds to toggle Steady Burn mode.
• Hold Yellow cable to +12 VDC for 4 seconds to toggle Random pattern mode.
About Flash Patterns
• All STL LED products are equipped with a non-volatile memory which will recall the last ash pattern when the product is turned on.
• Follow the wiring diagram to identify the Flash Pattern wire to manually cycle through patterns.