SpeedTech Lights Z-3 - License Plate

Vertical
Conguration
Horizontal
Conguration
7 SpeedTech Lights, Inc © 2019
Z
-
3
GRILLE / SURFACE MOUNT
License Plate Mounting Bracket (Sold Separately)
• This kit includes hardware and (3) metal pieces: (2) short pieces and (1) long piece.
• Use the hardware included with the Bracket to connect both short pieces to the long piece.
• Run Z unit cable through the Foam Pad and short piece central holes.
• Use the hardware included with the Bracket to secure a Z unit to each short piece.
• Use the same hardware that secures the license plate to the vehicle to mount the assembly.
• NOTE: Lights can be congured to hang vertically or horizontally.