Spektrum AR635 - Receiver Setup Procedure

EN
7
Receiver Setup Procedure
The Spektrum AR635 receiver offers LED programming and the following
adjustable features:
• 3D Airplane: Non-Computer transmitter
• 3D Airplane: Computer transmitter
• Sport Airplane: All Transmitters
If you select a 3D Airplane transmitter, 5 channels are available for aircraft
controls. The Gear channel is reserved for Flight Modes. The Sport Airplane
transmitter selection enables you to use all 6 channels; Flight Modes for
Gear Up and Gear Down are activated by the Gear channel.
After you select the transmitter type, complete a control direction test
to ensure the control surfaces are moving in the correct direction. Any
necessary channel reversing is done at this time in the transmitter. It
is extremely important to complete the control direction test before
proceeding to gain adjustment. The gain adjustment controls are dependent
on the transmitter channel reverse values.
Once you enter the Gain Control menus, use three LED lights to navigate the
menu options. Thoroughly review the Gain Control section before attempting
to change any gain values in the receiver. The color of the LED indicates the
active axis (Aileron, Elevator or Rudder), while the LED pattern (On, Off or
Flashing) will help you navigate the menu and gain values.