Spektrum TM1000 - Sensors and Connections

EN
Temperature, Voltage and Optional RPM Sensors
TheTM1000includesatemperatureandexternalvoltagesensors.OptionalRPM
sensors are available for Gas/Glow and electric brushless models to monitor RPM.
Temperature Sensor
To monitor the temperature of most any component, secure the sensor on the object.
Itmustcomeintocontactwiththesurfacetogetanaccuratetemperaturereading.You
can loop the temperature sensor around the engine’s cylinder head to assist in tuning
an engine. To monitor battery temperature, you can wrap the sensor around the battery.
The mounting position of the sensor, especially on gas or glow engines, will result in
differenttemperaturereadings.Soit’simportanttoexperimentwithdifferentpositions.
Installation
InsertthetemperaturesensorconnectorintotheportlabeledTEMP/VOLT.The
temperature sensor is now active and the actual temperature displays on screen.
Modellbau Lindinger GmbH e-Mail: office@lindinger.at www.lindinger.at
Modellbau Lindinger GmbH e-Mail: office@lindinger.at www.lindinger.at