Spellman MONOBLOCK Series - Xrb Commands; Program Kv

101501-695 REV B 8
475 Wireless Boulevard • Hauppauge, New York 11788, USA • www.spellmanhv.com • T:+1 631.630.3000 • F:+1 631.435.1620
4.5 XRB COMMANDS
4.5.1 Program kV
Description:
The host requests that the firmware change the setpoint of kV.
Syntax:
<STX>VREF<SP><ARG><;><CSUM><CR><LF>
Where:
<ARG> = the voltage setpoint in tenths of a kV (.1 kV), in ASCII format
Example:
<STX>VREF<SP>643;<CSUM><CR><LF> programs the kV to be
64.3 kV.
Response:
None