Need help?Do you have a question about the Spellman XRV Sub-system and is the answer not in the manual?
User responsibility for safe operation and training.
Details on single-ended (Unipolar) and double-ended (Bipolar) X-ray tube configurations.
Emphasizes necessary safety precautions when operating X-ray equipment.
Describes the XRV Generator's high voltage capabilities and features.
Lists available XRV Generator models with voltage, power, and polarity.
Details the connectors and features on the rear panel of the XRV160kV.
Describes the LED indicators on the XRV225 front panel.
Details the rear panel connectors and features for 4kW XRV225kV units.
Shows rear panel connections for the 6kW 208Vac 3 phase input.
Illustrates rear panel connections for the 6kW 400Vac 3 phase input.
Details the rear panel connections for the XRV450 bipolar generator.
Shows rear panel connections for the XRV450 bipolar cathode generator.
Describes LED indicators on the XRV450 cathode generator front panel.
Describes the XRVC Controller's embedded computing system and GUI.
Provides critical safety warnings and general requirements for setup.
Covers general installation principles, location, and clearances.
Details grounding procedures for both unipolar and bipolar systems.
Covers general HV cable installation practices and connector types.
Outlines minimal requirements for interlocks and communications in a unipolar system.
Details Amphenol connector types and power connection safety.
Details circuit breaker requirements for power sources.
Covers I/O Box configurations and power connection safety.
Guides through configuring serial, USB, and Ethernet communication ports.
Provides safety warnings and an overview of the filament calibration procedure.
Details GUI calibration steps and refers to product specifications.
General| Brand | Spellman |
|---|---|
| Model | XRV Sub-system |
| Category | Portable Generator |
| Language | English |
To Next Page
