Page 43 of 98
118157-001 Rev C
Cleaning Cable Plug:
While supporting the cable with one hand, apply a small bead of the Dow Corning #4 silicone compound
to opposite sides of the cable plug to opposite sides of the cable plug. Spread the compound with your
finger evenly over the entire rubber cone surface of the plug. Using another clean lint free wipe, remove
the applied silicone from the cable plug. Do not use alcohol to clean the cable plug, as this will dry out
the rubber cone. Repeat for the opposite side and place in a clean area.
dry lint free cloth
silicone compound
evenly with finger
with new cloth
To Next Page
Loading...
