Page 78 of 98
118157-001 Rev C
XRVC Control Box:
The XRVC Control Box eliminates the need of having a personal PC to run and monitor the XRV
Generator and subsystem components. It employs an embedded computing system that runs a custom
graphical use (GUI) interface and allows the user to configure custom X-ray tube profiles for any of the
Spellman XRV series. Although it can be used without the I/O System Interface Box, it is more readily
integrated with it. The I/O Box includes the cables and connectors that intuitively connects to the XRVC
Controller. The placement and setup is relatively quick and allows the user a plug and play system.
Instructions on setting up the XRVC controller and operation are covered in the XRVC manual.
To Next Page
Loading...