Spellman XRV Sub-system - XRV Sub-System Nomenclature

Page 97 of 98
118157-001 Rev C
Accessory Test Kits for XRV Generators:
XRV-14-4 (Filament Measuring Adapter)
XRV X-ray tube filament calibration tool utilizing a unique
adpater between the high voltage cable plug and the XRV
Generator for X-ray tube filament current calibration and
verification. For use with both the XRV160 and XRV225
models. Customer supplied ampere meter is required.
XRV Sub-system Nomenclature:
XRV-1-(x)
High Voltage Power Supply (A1)
XRV-2-(x)
X-Ray Tube (A2)
XRV-3-(x)
HV Cable & GND Cable Kit (W1 & W2)
XRV-4-(x)
HV Cable Flange (Power Supply Side) (FL1)
XRV-5-(x)
HV Cable Flange (X-ray Tube Side) (FL2)
XRV-6-(x)
Cooler/Chiller (A3)
XRV-7-(x)
Cooling Hose (Item 3 & 4)
XRV-8-(x)
Controllers & Cable Kit (A4, W3, W4, W5)
XRV-9-(x)
I/O Box (A5)
XRV-10-(x)
Mains/Aux & GND Cable Kit (W6 & W10)
XRV-11-(x)
I/O Box to Door Interlock Cable (W7)
XRV-12-(x)
I/O Box to Controller Cable (W8)
XRV-13-(x)
I/O Box Input Power Cable (W9)
XRV-14-(x)
Test Kits for XRV
For a detailed list, refer to Spellman Drawing # 408216-001