Page 4 of 98
118157-001 Rev C
XRV Subsystem Installation Manual:
General Safety
It intent of this manual to identify and safely execute the installation of the XRV Generator and
subsystem components. “Caution” and “Warning” labels used throughout this manual to highlight
critical areas of the installation and operation of this equipment. Installation, maintenance and
operation should only be handled by qualified personnel. Failure to follow these guidelines may result in
hazardous operating conditions.
Personal Safety
It is the responsibility that the individual operating this equipment do so in a safe non-hazardous
manner. Training is required on a regular basis to prevent personal injury. It is extremely important to
monitor X-ray levels applying the use of dosimeters or alternate electronic measuring devices within
normal standard guidelines. Radiation measuring equipment requires calibration on a regular basis to
prevent personal injury. Do not use this equipment in an unsafe manner or for anything other than the
intended use. Contact Spellman High Voltage regarding questions about the safe operation or
installation of this equipment.
To Next Page
Loading...
