Page 81 of 98
118157-001 Rev C
GUI Installation:
The GUI is designed to control the XRV series x ray generator. It allows users to control all necessary
functions of the x-ray generator from a user-friendly windows base menu. Functionality is organized into
nine screens that appear as tabs within the GUI. The “Main Control” screen will generally be the used
most frequently. Additional screens for seasoning, communication, user configuration and filament
control provide functionality necessary to control and monitor all aspects of the XRV series power
supplies.
1.1 System Requirements
• A computer with a male RS232 D 9 pin connector
• Windows XP, Windows 7, or Windows 10
• CD-ROM drive, USB or from Spellman website
• Color Monitor with display resolution of 1024 X 768
2.2 Installation via CD
1. Insert the XRV disk in the CD Drive
2. Click “Start” Button on screen
3. Click on “My Computer icon”
4. Click CD drive icon
5. Double-click on the XRV setup icon
6. Follow the instructions displayed on screen
2.3 Installation via USB Flash Drive
1. Insert the XRV flash drive in the USB port of the computer
2. Open the GUI 1.8kW to 6kW folder
3. Open the GUI X4867 folder
4. Open the GUI X4867 subfolder
5. Open D0204001_V15038 folder
6. Double Click Setup 1 Icon
7. Follow instructions displayed on screen
To Next Page
Loading...
