Page 38 of 98
118157-001 Rev C
Unpacking Generator:
The XRV Generator and subsystem components are shipped in padded containers to avoid damage
during shipment. All of the containers will have an indication that shows the correct orientation for
shipment and unpacking. The XRV Generator is surrounded within a foam padding to protect it from
shock and vibration during shipment. There are 6 bolts on the surrounding bottom of the crate that
need to be loosened in order to remove the XRV Generator. Do not remove the 4 bolts from the top of
the crate. Once the bolts are loosened, the top can be removed. Two people can lift the top of the crate
evenly from either end or a hoist and strap may be used instead. Visually inspect the XRV Generator for
any signs of damage once the top is removed. Report any damage to Spellman High Voltage. Include any
photos and a verbal description. The crate should not be exposed to moisture or extreme temperatures.
Loosen 6 Bolts on Bottom
of Generator Crate
Lift Generator
from Handles
To Next Page
Loading...