Spellman High Voltage Electronics Limited - Company Confidential
This document must not be copied or distributed without express permission from Spellman High Voltage Electronics Limited
81408-4r2 MPD Series Installation and User Guide
SAFETY
DANGER
HIGH VOLTAGE
RISK OF ELECTROCUTION
Observe extreme caution when working with this equipment
High voltage power supplies must always be connected
to a protective earth
Do not touch connections unless equipment is turned
off and the capacitance of both the load and power
supply are grounded
Allow adequate time for discharge of internal
capacitance of the power supply
Do not ground yourself or work under wet or damp
conditions
When maintenance of equipment fitted with this power
supply requires removing the equipment cover with the
power on, this should only be done by qualified
personnel aware of the hazards
This power supply has no user serviceable parts.
Return to supplier for servicing
To Next Page
Loading...
