If any waste has soiled the
inside of the bin or splash
panel wash them under
running water and scrub
with a brush if necessary.
Clean the splash panel with
a damp cloth to remove
any splashes/spilled coffee.
Dry all parts after washing.
Place a new bin liner in the
waste bin and secure it with
the retaining ring.
Replace the waste bin in the
dispenser in reverse order of
disassembly.
Grip the front splash panel
on both sides of the outlet
spout(s) and lift up approx.
1cm then pull it forward to
remove it from the
dispenser.
To Next Page
Loading...
