Spengler CL22 - Operation; Identification Markings on the Drinks Dispenser

8
Table Top Series
BEFORE INITIAL START-UP
Operation
• Readtheoperatingmanualcarefullybeforeusingthedispenser.
• Itisessentialtodisconnectthedispenserfromthepowersupplybeforecarryingoutanyrepairwork.
• Thedispenserisdesignedexclusivelyforusewithdrinkingwaterthathasahardnessof6-8°dH.
Ifthehardnessishigher,asuitablefiltermustbeused.
• Pleaseobservethemaintenanceadviceandintervals.
• Anymaintenance,cleaningandrepairtasksthattheendcustomerisnotspecificallyauthorisedtoperform
mayonlybecarriedoutbytrainedservicepersonnel.
• Foryourownsafety,andtoensurethatyourdispenserenjoysalongservicelife,youshouldonlyuse
originalSpenglerspareparts.
• Thedispensermayonlybeusedtopreparetheproductsspecifiedinthesectiononintendeduse.
• Neversubmergethedispenserorthepowercableinwater.
Identication markings on the drinks dispenser
The name plate (sample shown below) and the wiring diagram are located inside the dispenser on the right side
of the door frame. Before connecting the dispenser to the mains power supply for the rst time it is critical to
conrm that the rated power on the name plate matches the mains power supply’s rating for the service area.