Spengler CL22 - Filling the Product Containers (Continued)

31
Table Top Series
Filling the product containers (continued)
3. Removetheproductcontainer.
Lifttheproductcontainerupslightlyatthefront(B)andremoveitfromthedispenser(C).
4. Removethelidandfilltheproductcontainer.
5. Productsmustnotbepackedtightly.Avoidanyformofcompression.
6. Afterfillingtheproductcontainer,reinsertitandmakesureitlocksintoplaceonthecontainerholder.
7. Reopentheproductdispensingunitbyrotatingtheoutletsothatthearrowpointsstraightdown.
INGREDIENT HANDLING
B C