Installing the roof top dish antenna
Once the location of the antenna has been selected, prepare the area of the RV
roof to glue and screw the roof top unit assembly into position. Screw location
fixing points have been provided, should you need additional fixing locations
mark and drill these as required.
Ensure that all screw fixings are covered with sealant to ensure that there are no
leaks into the RV.
Installing the roof top cable cover and entry plate
Once the antenna has been installed, the cover and cable entry plate needs to be
installed.
Example of cable cover and entry plate ready to be glued and screwed into position.
To Next Page
Loading...
Need help?
General
