Not to be distributed without prior consent of SPI Lasers UK Ltd.
Slide: 13
FS-S00149-Rev A
Customer Requirements Pre Install
Unpacking & Handling
29/06/2016
CAUTION: The Prism Fibre Laser is heavy, precautions must be taken when
lifting and moving. Failure to do so may cause serious injury !
On arrival the following actions must be undertaken before removal of the laser from the container.
• Inspect the shipping container for any damage.
• Record all damage for insurance purposes.
The Prism Fiber Laser weighs 33kg without the BDO therefore to avoid risk of personal injury or damage to the
Prism Laser module, SPI advise that the laser must be lifted with two people or by use of a lifting crane. If the laser
is required to move over distance a trolley or similar mechanical assistance is required.
To Next Page
Loading...
Need help?
General
