SPI Lasers redPOWER QUBE User Manual (English)

Need help?

Do you have a question about the SPI Lasers redPOWER QUBE and is the answer not in the manual?

SPI Lasers redPOWER QUBE Specifications

General

Brand	SPI Lasers
Model	redPOWER QUBE
Category	Measuring Instruments
Language	English

Summary

3 Health and Safety

3.1 General

General safety information and precautions for installation and operation.

3.3 Hazards

Details various hazards associated with the laser's operation.

3.4 Compliance

5 redPOWER QUBE Product Tour

5.1 Key Parts

5.2 Key Features

Highlights the significant features and capabilities of the QUBE Fiber Laser.

5.4 Control System Safety Functions

Outlines the safety functions implemented in the control system.

6 Getting Started

6.2 Unpacking and Handling

7 Installation

7.1 Safety and Compliance During Installation

Safety and compliance considerations during installation.

7.2 Location and Environment

7.4 Cooling Water Connections

Details on connecting the laser to a cooling water system.

7.6 Electrical Connections

Guides on making all necessary electrical connections.

7.6.3 Mains Power Connection

7.6.4 PL1 – Serial Port Control Interface

7.6.5 PL5 – Machine Interface

7.8 Connecting and Disconnecting the PIPA-Q Optical Connector

7.8.1 Precautions

8 Operating Instructions

8.1 Before Operation

Pre-operation checks and risk assessment.

8.2 Powering the QUBE Fiber Laser On and Off

Step-by-step instructions for powering the laser on and off.

8.3 Control of Operating Temperature

Guidelines for managing the laser's operating temperature.

8.4 Alarms and Warnings

Explains alarm and warning conditions and their meanings.

9 Laser Control and FiberView

9.2 Basic Operation

Configuring Operating Parameters

How to configure operating parameters using the FiberView interface.

9.3 Parameter Sets

Defines how Parameter Sets control laser output.

9.4 Process Cycles

Describes the automation feature for sequences of operations.

10 Basic Control using Serial Communication

10.2 Functionality

11 Machine Interface Reference

11.2 Default Input Functionality

Details the default configuration of machine interface inputs.

11.3 Default Output Functionality

Details the default configuration of machine interface outputs.

11.2.2 Laser Start (Input Function ID 1)

11.2.3 Laser ON / Process Cycle Start (Input Function ID 2)

Describes the Laser ON/Process Cycle Start input function.

11.2.4 Process Cycle Step (Input Function ID 5)

11.2.5 Alarm Reset (Input Function ID 6)

Describes the Alarm Reset input function.

11.2.6 Trigger (Input Function ID 3)

Describes the Trigger input function.

11.3.1 Laser STANDBY (Output Function ID 1)

11.3.2 Laser ON / Process Cycle Active (Output Function ID 2)

Describes the Laser ON/Process Cycle Active output function.

11.3.3 Remote Control (Output Function ID 3)

11.3.4 Alarm (Output Function ID 7)

Describes the Alarm output function.

11.3.5 Warning (Output Function ID 8)

Describes the Warning output function.

12 Alarm and Warning Messages

12.1 Alarm Code Definitions

Defines the structure and meaning of alarm codes.

12.1.1 PRISM FL Module Zone Alarms

Lists specific alarms for the PRISM FL Module.

12.1.2 System Zone Alarms

12.1.3 Control Zone Alarms

12.1.8 Pump diode PSU Zone Alarms

12.2 Warning Code Definitions

Defines the structure and meaning of warning codes.

12.2.1 QUBE FL Module Zone Warnings

Lists specific warnings for the QUBE FL Module.

SPI Lasers redPOWER QUBE User Manual

Table of Contents