© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
PSU safe
This output is on when all the pump diode power supplies are disabled and discharged. It
indicates that the process cabinet door may be opened.
PSU ready
This output is on when all the pump diode power supplies are enabled and are at full voltage
ready to operate the pump diodes.
Figure 24 shows a typical connection
Figure 24 A Typical Connection to PL98
PL98 is a 10 way 5.08mm pitch connector. A suitable mating socket is Phoenix Contact part
number 1778069. It accepts wire sizes from 0.25mm
2
to 2.5mm
2
or 24AWG to 12AWG, the
strip length is 7mm or 0.25" and the tightening torque is 0.5-0.6Nm.
To Next Page
Loading...