SPI Lasers redPOWER QUBE - Figure 7 Redpower QUBE Cased Fiber Laser with Auxiliary Equipment; Auxiliary Equipment

© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
30
5.5 Auxiliary Equipment
Figure 7 redPOWER QUBE Cased Fiber Laser with Auxiliary Equipment
Installation of the QUBE Fiber Laser within an integrated laser system requires the provision
of auxiliary equipment for control, cooling and safety as shown in Figure 7. Requirements for
the auxiliary equipment are given in the sections indicated below.
 Chiller – Section 17.3.2
 Mains Power Supply – Section 17.3.1
Cabinet door interlocks and an external E-stop can be connected to the QUBE Fiber Laser’s
internal safety circuit. It is the responsibility of the Laser Integrator to make the process
cabinet safe both as required in normal operation and after activation of the E-Stop.
SPI Lasers does not assume responsibility for specific integration decisions affecting the
safety and compliance to international standards of the Laser Integrator’s final laser product or
system.