© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
12 Alarm and Warning Messages
12.1 Alarm Code Definitions
Each alarm code contains information about the zone, and module associated with the failure.
It can be broken down as follows:
Alarm Code = ZMNN
Where
Z is the zone associated with the alarm as described in Table 3 above.
M is the module number to identify devices where there is more than one.
NN is the alarm code identifying the problem.
12.1.1 PRISM FL Module Zone Alarms
Module Communications Failure
Auxiliary Power Supply Low Fault
Driver Power Supply not Present
Internal Communications Failure
To Next Page
Loading...