© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
CONTENTS
1 Structure and Scope of these Instructions for Use 11
2 Definition of Symbols and Terms 12
3 Health and Safety 13
3.1 General 13
3.2 Intended Use of the QUBE Fiber Laser 14
3.3 Hazards 14
3.4 Compliance 16
3.5 Labelling 18
4 Document References 20
5 redPOWER QUBE Product Tour 20
5.1 Key Parts 21
5.2 Key Features 23
5.3 Software Tools 27
5.4 Control System Safety Functions 28
5.5 Auxiliary Equipment 30
5.6 Explanation of Order Codes 31
6 Getting Started 32
6.1 Receiving and Inspection 32
6.2 Unpacking and Handling 32
6.3 Unpacking the Beam Delivery Optic 34
7 Installation 35
7.1 Safety and Compliance During Installation 35
7.2 Location and Environment 35
7.3 Mounting 36
7.4 Cooling Water Connections 36
7.5 FiberView Installation 39
7.6 Electrical Connections 40
7.7 Routing the Beam Delivery Optic 63
7.8 Connecting and Disconnecting the PIPA-Q Optical Connector 64
8 Operating Instructions 68
8.1 Before Operation 68
8.2 Powering the QUBE Fiber Laser On and Off 69
8.3 Control of Operating Temperature 69
8.4 Alarms and Warnings 70
9 Laser Control and FiberView 71
9.1 Overview 71
9.2 Basic Operation 71
9.3 Parameter Sets 74
To Next Page
Loading...