SPI Lasers redPOWER QUBE - 1 Structure and Scope of These Instructions for Use

© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
11
1 Structure and Scope of Instructions for Use
These Instructions for Use for SPI Lasers’ redPOWER
®
QUBE Cased Fiber Laser contains
all the information that Users needs to know for its safe and efficient use. This information is
important. These Instructions for Use should be read before installing and using the QUBE
Fiber Laser and made available for reference at the location where the QUBE Fiber Laser is
being used. Additional or replacement copies are available from SPI Lasers.
These Instructions for Use are divided into the sections below which provide Users with health
and safety information before introducing the QUBE Fiber Laser and then guiding them
through its installation, operation, maintenance and disposal. Lastly it provides other useful
information and the QUBE Fiber Laser’s specifications.
1
Structure and Scope of Instructions for Use
2
Definition of Symbols and Terms
3
Health and Safety
4
Document References
5
redPOWER QUBE Product Tour
6
Getting Started
7
Installation
8
Operating Instructions
9
Laser Control and FiberView
10
Basic Control using Serial Communication
11
Machine Interface Reference
12
Alarm and Warning Messages
13
Maintenance
14
Disposal
15
General Information
16
Contact Information
17
General Specifications
18
Optical Specifications
19
Mechanical Specifications
20
Customer Service
The QUBE Cased Fiber Lasers covered by these Instructions for Use have order codes:
SP
-
0300
0500
0750
1000
1500
-
C
-
W
-
020
050
100
-
10
15
20
-
PIQ
-
0
B
12
-
001
-
001
The order code can be found on a label on the rear panel of the QUBE Fiber Laser.
Details of the options shown in bold are expanded in Section 5.6 below.