SPI Lasers redPOWER QUBE - Figure 23 Typical Connections to PL82 (PLC)

© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
57
Figure 20 Typical connections to PL82 (PLC)
PL81 is a 4 way 5.08mm pitch connector. A suitable mating socket is Phoenix Contact part
number 1778001.
PL82 is an 8 way 5.08mm pitch connector. A suitable mating socket is Phoenix Contact part
number 1778043.
Both accept wire sizes from 0.25mm
2
to 2.5mm
2
or 24AWG to 12AWG, the strip length is 7mm
and the tightening torque is 0.5-0.6Nm.
The normal operating sequence would be:
 Close process cabinet doors
 Enable PSU
 Wait for PSU ready, about 500ms
 Enable laser output via machine interface PL5, function IN 1
 Laser process takes place
 Disable laser output via machine interface PL5, IN1
 Disable PSU