© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
8 Operating Instructions
WARNING: Follow the procedures and instructions described in the
following section.
Failure to do so may lead to harmful radiation exposure resulting in
personal injury and damage to the equipment.
This section describes the operation of the QUBE Fiber Laser. Before proceeding refer to all
relevant sections in these Instructions for Use covering safety, environmental and electrical
specifications, component inspection and QUBE Fiber Laser installation.
In this section the names of electrical connections are given in bold.
8.1 Before Operation
8.1.1 Risk Assessment and Checks
Carry out and implement a risk assessment covering personnel and the environment
appropriate to the installation and operation of the integrated laser system.
Ensure that the protective cap and protective tape are removed from the optical
connector.
Ensure that the optical connector is securely mounted
Ensure that the beam is directed towards the work piece, a power meter or an
appropriate beam dump.
Ensure all laser safety precautions are adhered to.
Ensure a supply of chilled water is connected to the QUBE Fiber Laser in accordance
with Section 7.4.
Ensure a supply of chilled water is connected to the optical connector in accordance
with Section 17.3.
Ensure the electrical connections are made in accordance with Section 7.5.
8.1.2 User Training
All Users must be officially trained and authorised within their respective organisations. They
must also be fully conversant with the following:
Laser hazards, safety procedures and correct use of related safety equipment.
Hazards related to the use of Lasers for materials processing, prescribed safety
procedures and related equipment.
The contents of these Instructions for Use, and therefore the safety provisions in it.
To Next Page
Loading...