SPI Lasers redPOWER QUBE - 11.3 Default Output Functionality; 11.3.1 Laser STANDBY (Output Function ID 1)

© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
107
Figure 65 Gated Trigger Operation (Pulsed Output)
Note: Gated Trigger is not synchronised with the output pulses in during Pulsed Output.
Figure 66 Gated Trigger Operation (CW Output)
11.3 Default Output Functionality
11.3.1 Laser STANDBY (Output Function ID 1):
 Default connection
o PL5 pin number 19
o Output number 0
 Basic Function Description
o SET when the state is the STANDBY state.
o CLEAR when the state is in the OFF state.