IM-P713-01 CTLS Issue 1
2
AEL7 Series Electric actuator
Contents
1. Safety information
4
1.1 Wiring notes
1.2 Safety requirements and electromagnetic compatibility
5
1.3 Intended use
1.4 Access
1.5 Lighting
1.6 Hazardous liquids or gases in the pipeline
6
1.7 Hazardous environment around the product
1.8 The system
1.9 Pressure systems
1.10 Responsibilities of the operator and operating (including maintenance) personnel
1.11 Temperature
1.12 Tools and consumables
1.13 Protective clothing
7
1.14 Permits to work
1.15 Handling
1.16 Safe lifting practice
1.17 Residual hazards
1.18 Disposal
1.19 Returning products
8
1.20 Responsibilities of the operator and operating (including maintenance) personnel
2. General product information
9
2.1 Introduction
2.2 Series in the AEL7 range 10
2.3 Operating principle 11
3. Installation
12
3.1 Location
3.2 Operational Considerations – End Position and Stroke Settings
13
3.3 Operational Considerations – Motor Brake
3.4 Hand wheel Assembly (6 – 20 kN)
14
3.5 Coupling the Actuator to a Valve
To Next Page
Loading...
