IM-P713-01 CTLS Issue 1
8
AEL7 Series Electric actuator
1.19 Returning products
Customers and stockists are reminded that under EC Health, Safety and Environment Law, when
returning products to Spirax Sarco they must provide information on any hazards and the
precautions to be taken due to contamination residues or mechanical damage which may present
a health, safety or environmental risk. This information must be provided in writing including
Health and Safety data sheets relating to any substances identified as hazardous or potentially
hazardous.
1.20 Responsibilities of the operator and operating
(including maintenance) personnel
The operator is responsible for ensuring that safe systems of operation and practice are
implemented and maintained. Only competent persons must be allowed to be able to operate and
maintain these devices, and these persons must be familiar with, and comply with the applicable
health and safety standards or guidelines.
The installation and maintenance instructions should form part of the standard operating
procedures for maintenance and must therefore be kept in an accessible location and in a legible
condition. Product identification and safety related labels must also be kept in a clean and legible
condition. Identification and safety labels must be replaced if they become damaged or obscured
in operation.
To Next Page
Loading...
Need help?
General
