IM-P713-01 CTLS Issue 1
26
AEL7 Series Electric actuator
5. Actuator Accessories
5.1 Actuator Accessory Safety Information
Caution
Before commencement of any work to inspect, install, commission, remove or modify any
of the AEL7 Series actuator accessories, please read to Section 1 "Safety Information". and
Section 4.1 "Electrical Connection Safety Considerations".
In order to select the correct accessories for each actuator, refer to Table 10. and Table 11. The AEL7 Series
actuators are modular (based on frame size). However for actuators that require a positioner card, it is
recommend that the actuators are supplied fitted with the positioner card direct from the factory.
Table 10 VMD Actuator Accessories
Actuator Type Thrust Voltage Heater Aux. switch Potentiometer
AEL7 VMD
1 kN
230 Vac
AEL7X181
AEL7X016 AEL7X001
1
110 Vac
24 Vac
AEL7X183
24Vdc
2-4 kN
230 Vac
AEL7X191
AEL7X010 AEL7X002
1
110 Vac
24 Vac
AEL7X193
24Vdc
6 kN
230 Vac
AEL7X201
AEL7X011 AEL7X003
1
110 Vac
24 Vac
AEL7X203
24Vdc
8-20 kN
230 Vac
AEL7X211
AEL7X012 AEL7X004
110 Vac
24 Vac
AEL7X213
24Vdc