Spirax Sarco AEL8 Series - Page 4

IM-P714-05 CTLS Issue 1
4
AEL8 Series Safety Information
spiraxsarco.com
EN
Spirax Sarco Ltd,
Runnings Road Cheltenham GL51 9NQ United Kingdom Low Voltage Directive EMC Directive Machinery Directive
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.6, 1.3.1,
1.3.2, 1.3.7, 1.5.1, 1.7.3, 1.7.4 EN 61010-1:2010+A1:2019 EN IEC 61010-2-202:2021 0 EN 61800-3:2004+A1:2012 0 EN ISO 12100:2010 0 0 0
0 0
name number Performed Certificate
0 0 0 0
0 0 0 0
Additional information:
0 0
Signed for and on behalf of: Spirax Sarco Ltd,
N Morris Compliance Manager, Steam Business Development Engineering Cheltenham 2023-06-30
GNP252-CE-C issue 1
Electric Linear Actuators:
(name, function):
(place and date of issue):
Where applicable, the notified body:
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
References to the relevant harmonised standards used or references to the other technical specifications in
relation to which conformity is declared:
Name and address of the
manufacturer or his authorised
representative:
0
0
0
Apparatus model/Product:
(signature):
0
0
AEL8 Series
0
0
0 0
0
(Machinery Directive)
0
(EMC Directive)
0
0
(Low Voltage Directive)
(Annex I clauses)
2006/42/EC
2014/30/EU
2014/35/EU
spiraxsarco.com
Electric Linear Actuators: AEL8 Series 0 0
Spirax Sarco Ltd,
Runnings Road
Cheltenham GL51 9NQ United Kingdom
Approved Body number Performed Certificate
0 0 0 0
0 0 0 0
Additional information:
0 0 0 0
Signed for and on behalf of: Spirax Sarco Ltd,
N Morris Compliance Manager Steam Business Development Engineering Cheltenham 30 June 2023
GNP252-UK-C issue 1
The Electromagnetic Compatibility Regulations 2016
The Supply of Machinery (Safety) Regulations 2008
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.6, 1.3.1, 1.3.2, 1.3.7, 1.5.1, 1.7.3, 1.7.4
0
(name, function):
SI 2016 No.1101 *
0
0
SI 2016 No.1091 *
(*As amended by EU Exit Regulations)
SI 2008 No.1597 *
(Annex I clauses)
(place and date of issue):
Where applicable, the approved body:
DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant statutory requirements of:
References to the relevant designated standards used or references to the other technical specifications in relation to which conformity is declared:
Name and address of the manufacturer or his
authorised representative:
0
0
0
Apparatus model/Product:
(signature):
The Electrical Equipment (Safety) Regulations 2016
0
0
0
SI 2016 No.1101 *
SI 2016 No.1091 *
0
EN 61010-1:2010+A1:2019
EN IEC 61010-2-202:2021
0
EN 61800-3:2004+A1:2012
0
EN ISO 12100:2010
0
0
0
0
0
SI 2008 No.1597 *
0
Page 1 of 1