IM-P505-02-US Issue 1
49
UTM20 Series Ultrasonic Transit-time Flowmeters
10.4 Setup > Meter > Pipe
An asterisk (*) indicates the parameter default
Pipe Submenus Options/Descriptions
PIPE MATERIAL
STAINLESS 302/303 ALUMINUM POLYPROPYLENE
STAINLESS 304 BRASS NAVAL HD POLYETHYLENE
STAINLESS 304L CARBON STEEL LD POLYETHYLENE
*STAINLESS 316 COPPER PFA TEFLON
STAINLESS 347 IRON - CAST PVC CPVC
STAINLESS 410 IRON - DUCTILE PVDF
STAINLESS 430
PIPE TYPE
For the best accuracy, measure the outer diameter and wall thickness with a gauge and
select MANUAL" or MANUAL MM
If you do not have a gauge, you can select an ASME/ANSI or ASTM definition Schedule,
copper tubing and cast iron class are filtered based on pipe material selection
If stainless steel pipe, carbon steel, cvc, pcvc material is selected, the following pipe
schedules are also available as applicable:
SCHEDULE STD SCHEDULE 40 SCHEDULE 140
SCHEDULE 5 SCHEDULE 60 SCHEDULE 160
*SCHEDULE 10 SCHEDULE 80 SCHEDULE 180
SCHEDULE 20 SCHEDULE 100 SCHEDULE STG
SCHEDULE 30 SCHEDULE 120
If copper material is selected, the following types are also available:
TYPE K TYPE M TYPE L PIPE SIZE
If cast iron pipe material is selected, the following classes are also available:
CLASS A CLASS C CLASS E CLASS G
CLASS B CLASS D CLASS F CLASS H
If ductile iron pipe material is selected, the following classes are also available:
CLASS 50
CLASS 51
CLASS 52
CLASS 53
CLASS 54
CLASS 55
CLASS 56
If aluminum or brass naval material is selected, the following is also available: PIPE SIZE
(in")
PIPE SIZE
Available only when PIPE TYPE is MANUAL; Numeric entry; min 0 5" (15 mm), max 300 in
(7500 mm)
PIPE SIZE
NOMINAL
PIPE SIZE NOMINAL is substituted for PIPE SIZE when a schedule/tubing/class is selected
Enumeration based on schedule; min 0 5" (15 mm), max 24" (610 mm) ½, ¾, 1, 1¼, 1½, 2,
2½, 3, 3½, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24
WALL
THICKNESS
Numeric entry; *min 0 00, max 5" (125 mm); WALL THICKNESS is only useful for MANUAL
METRIC and MANUAL"; It can be skipped for pipe schedule, tubing and classes
LINER
MATERIAL
NONE HD POLYETHYLENE TAR EPOXY
ACRYLIC LD POLYETHYLENE PFE TEFLON
ASBESTOS CEMENT POLYPROPYLENE GLASS PYREX
EBONITE POLYST YRENE FIBERGLASS EPOXY
MORTAR RUBBER
LINER
THICKNESS
Numeric entry; min 0 00, max 5 in (125 mm)
I.D. SIZE Numeric display in" or millimeters, based on PIPE TYPE
To Next Page
Loading...
